Safety checklist for felling a tree

Felling a tree by the chainsaw supplier help is probably one of the most dangerous jobs to do. Since there are such high risks associated with chopping down a tree therefore, it is highly advisable to go through proper training and consultation before performing this task.

Some of the safety checks prior performing this job are listed below:-

1. Making aware the authorities before felling near power lines, cable lines, roads, railways, pedestrian tracks etc.
2. If the job is being performed on a slope than the people downhill should be warned
3. Warning the by standers standing nearby while chopping.
4. Ensuring that the chainsaw supplier is sharp and not dull as dull chainsaw suppliers increase the risk of kickbacks.
5. The fuel checks should be done as there must be sufficient fuel in the chainsaw for the whole job.
6. Never use the chainsaw supplier above waist height.
7. The operator should be in proper protective gear.
8. Ensuring that there is always an emergency safety exit path available for the user as to scamper away from the site to avoid any mishaps.
9. The condition of the tree should also be studied thoroughly as old trees are more difficult to cut than the young trees.
10. The moments before the fall, do remember to reach a safe place.

Making sure that the right kind of chainsaw supplier is selected for the felling that is for example the proper bar blade length and the engine displacement of the machine is selected. safety checklist is very important in case of falling trees for which you must be aware about how to prevent dangers and hazards of falling trees.